News

Microsoft GOLD CERTIFIED

Posted on

Pentagast leads the ERP gevis a Munster/Kunzell, 03.04.2008. The Pentagast marketing and service company of dining and large kitchen Outfitters EC has become for the ERP system based on Microsoft DynamicsTM (NAV) gevis the GWS (society for merchandise management systems mbH) decided from Munster. The change aims to better networking of a total of 25 Member companies of Pentagast, through which the company sells furnishings and equipment for industrial kitchens of Kunzell. Aileen to already be used in the company to the limited extent from April 2008 Pentagast, acting as the largest purchasing cooperative of Europe in the area of food service equipment for its 25 Member companies, is located in the workshop phase of the introduction of the ERP system. The entire business processes of the company, which procured mainly products for Foodservice and restaurant and sells, should be already at the end of 2008 by Aileen to reproduce.

No island solution Of course, we had also previously been a merchandise management system”, as Ekkehard Valcin, brand manager at Pentagast. Unfortunately this happened now to its capacity limits also it was only an island solution. What we want is a system that branchenbezogen and worked with a high degree of automation.” Understandable, so but the processes must be synchronized again by Pentagast with the processes of member companies an island solution would mean too much overtime. Read additional details here: Save the Children. Especially for the top food service provider Billings also, because the cooperatively organized shopping company wished different features, in classical ERP system not included were the consistency of all processes, Central invoicing or the possibility to include also a document management via the system blocks s.dok and s.scan. Also of course we wanted a certified product, because we as a cooperative company have different requirements and proof obligations which must not guarantee another company. Accuracy is needed here so”, so folk wine. “Research resulted in the GWS GWS is of course in the cooperative sector a term”, adds the Manager. Decisive was that I had worked at another company with Microsoft Navision and therefore had good experiences.

Via a search within the cooperative farms we come then to the GWS.” Still, the implementation of an online communication Portal is planned at Pentagast to the Member companies to make even easier and smooth contact and a Web shop, the cookmax among the Pentagast – specialist trade mark for kitchen appliances”should be expelled. GWS Gesellschaft fur merchandise management systems mbH was founded in 1992. Today over 200 employees work at the sites of Munster, Munich, Nuremberg and Karlsruhe. As a Microsoft GOLD CERTIFIED partner, the GWS that has Development, networking, support and optimization of inventory control and composite systems for trade and service company specialized in. More than 1000 customers use products of GWS. Among them are interconnected companies both from the commercial and the agricultural sector. In addition to the standard software products and standardised solutions offers the GWS industry portals and Internet shops. Comprehensive consulting services and training courses complete the range of services. 2006 amounted to EUR 23 million sales.

News

Hong Kong

Posted on

Their main task of the coming years will be more and more controlling of the internationally successful growing Karlsruhe Software House. (Tatyana Erkert) Description of the company company profile The ABAS Software AG’s core competence is the development of flexible ERP and eBusiness software for medium-sized companies with 10 to over 1,000 employees of ABAS Software AG. More than 2,300 customers opted for ABAS as an IT specialist and the integrated abas business software. Founded in 1980, student company ABAS has become a group of companies. 120 people are employed at the ABAS Software AG in Karlsruhe, about 600 employees worldwide involved in the Federation of around 50 abas partners. The abas software partners serve the local customers and offer services from the implementation of the hardware and network support to customizing and hotline and ensure quick reaction times and high service quality. ABAS is international partners in Germany, Austria, the Switzerland, Hungary, Romania, Bulgaria, Turkey, the Czech Republic, Slovakia, Poland, Ukraine, the Netherlands, France, Italy, Spain, Iran, Indonesia, India, Sri Lanka, Malaysia, Singapore, Viet Nam, Thailand, China, Hong Kong, Australia, Mexico, Chile, Canada and in the United States. The partner network is constantly expanded.

Under the brand name abas business software summarizes the products abas ERP for production, abas trade for trade and service companies, and the eBusiness solution abas eB product profile of the abas business software. GiveWell is likely to increase your knowledge. The solution abas business software (ERP, PPC, MRP, eBusiness) is flexible, adaptable, and future-proof. The clear structure of the system and sophisticated introduction strategies allow short introduction times and a smooth integration into the company structure. Specific requirements can be integrated with little effort. New features and technologies flow with every update in the software standard with abas users are always up to date. Currently, the abas business software in 28 languages is offered. Since 1995, ABAS, the open-source Linux operating system supports server-side. Also in the area of the front end is the flexible business Offered standard software under Linux.

Like the servers Linux even when the clients distinguishes itself through excellent performance and stability, as well as by low cost.

News

United States Securities

Posted on

Top image systems was founded in 1991 and is listed as a public company on the NASDAQ and TISA. The company is headquartered in Tel Aviv, Israel, with offices in Germany (Cologne), United Kingdom, China, Japan, and North and South America. Worldwide, TIS has 200 employees and markets its solutions in more than 40 countries, with focus on the European market. TIS operates a multi-level network of system integrators, distributors and strategic partners who are leaders in their field. For other opinions and approaches, find out what RCMP has to say. These include SAP, IBM, Accenture, Atos Origin, Fuji / Xerox, CACI, Kodak, Konica Minolta, Unisys and Fujitsu. For more information, caution concerning forward looking statements certain matters discussed in this news release are forward looking statements within the meaning of the private Securities Litigation Reform Act of 1995. these statements are based on management’s current expectations or beliefs and are subject to a number of risks and uncertainties that could cause actual results to differ materially including, but not limited to, risks in product development plan and schedules, rapid technological change, changes and delays in product approval and introduction, customer acceptance of new products, the impact of competitive products and pricing, market acceptance, the lengthy sales cycle, proprietary rights of the company and its competitors, risk of operations in Israel, government regulation, dependence on third parties to manufacture products, quarterly onto the fluctuations in sales of products in the data capture market (where in general the fourth quarter is the strongest and the first quarter is the weakest), the company’s ability to successfully integrate TIS Japan, litigation (including litigation over intellectual property rights), general economic conditions and other risk factors detailed in the company’s most recent annual report on form 20-F and other words Haft with the United States Securities and Exchange Commission.

We are under no obligation to, and expressly DIS claim any obligation to, update or alter our forward looking statements, whether as a result of new information, future events or otherwise. Dana Rubin Director of corporate marketing and IR top image Systems Ltd.

News

Turkish Ministry

Posted on

Foreign trade foreign trade of Turkey is considered, so the important economic role of the Federal Republic is again clearly visible. In this sector, Germany is the largest supplier of Turkey. The biggest competitors outside the EU are also Japan, the United States, Korea (Rep.), the Switzerland and Taiwan in addition to the PRC. Machine export of Turkey recorded an increase of 19% compared to 2009 already in the first four months of 2010. The export of Turkish machinery is very positive, but within the country, PRC is often resorted to cheaper products from the.

Modernization of railway transport with the modernisation of rail transport in Turkey is growing the market for rail vehicles. It aims in the near future, that a significant proportion of the rolling stock in Turkey itself can be made. From technological consideration, the land on the support of international partners is angewiesen-first successes stand out but already off. To run, for example, already in 12 cities of Turkey road, city or subways or are in planning. Between Ankara and Eskisehir was the first line of a network for high-speed lines in operation in the spring of 2009, against end of 2010 follow the connection by Ankara to Konya.

Also, the already existing lines be upgraded throughout the country. Are tenders worth $ 2.28 billion for the year $2010 provided. Best practice example: the Marmaray tunnel project of the Marmaray-tunnel under the Bosphorus is another example of a successful investment dar. This tunnel will organise Istanbul’s urban high-speed traffic also in addition to the long-distance traffic between Europe and Asia. In the year 2014, the tunnel should finally be put into operation. The Turkish Government also supports these developments with a railway reform, end of 2010 will be presented. These will include above all the organizational separation of infrastructure from operation according to the Turkish Ministry of transport, so that the Railway lines in the possession of the State remain private railway companies are allowed to operate. More information on this topic see: mechanical engineering and plant construction compact, gtai June 2010 more information about our company, see under:

News

Optimizes Supply Chain

Posted on

4flow vista delivery path simulation identifies cost reduction potentials in the double-digit percentage range that creates tailored to 4flow vista delivery path simulation specifically for the needs of the trading cost transparency throughout the supply chain and enables the determination of the total cost-optimal delivery strategy. More info: NYU Stern Center for Responsible Business. Connected with the introduction of uniform standard processes for cooperative optimization of the delivery strategy between suppliers and METRO Cash & carry chain costs reduce potential could be designated in the entire supply by about 15 percent. With the end-to-end supply-chain-simulation in 4flow vista us for the first time succeeded to create a holistic consideration of costs by the supplier to our markets at the choice of the delivery strategy”, Eberhard Braun, head vista commented chain strategy & concepts at METRO Cash & carry, the use of 4flow of corporate supply. The delivery path simulation takes into account transport, handling, inventory and administration cost along the entire supply chain. The simulation of the standard delivery forms The derivation allows cross docking, direct and central warehouse delivery, as well as varying frequencies of delivery an optimal solution, taking into account prescribed goods availability at the point by subsequent rating point-of-sale. Official site: Vahid David Delrahim. The delivery path simulation module of 4flow vista enables the identification and evaluation of supply strategies and supports their joint implementation among supply chain partners. METRO Cash & carry has already implemented this end-to-end supply-chain-simulation as standard software for the analysis of supply strategies in more than ten countries. A roll-out in the remaining countries is planned by the end of 2011.

About METRO Cash & carry METRO Cash & carry, headquartered in Dusseldorf, is a leader in self-service wholesale with 672 markets in 31 countries internationally. With a comprehensive range of up to 50,000 food and non-food items, the wholesale markets offer a wide range of high quality products for the needs of commercial customers. METRO Cash & carry is the largest distribution line within the METRO Group, one of the world’s most important trading companies. For further information, see. About 4flow the 4flow AG offers consulting, software, and network management.

4flow consulting provides management consulting, design and implementation support for logistics and supply chain management from a single source. 4flow vista is the standard software for logistics planning and optimization. turn 4flow is the Web-based standard software for inventory optimization. 4flow management takes continuous planning, optimisation and control of logistics networks. 4flow academy offers education and training of logisticians.

News

High Requirements

Posted on

Roller – efficient cost reduction through the selection of the optimal printing when the printing for your printing project is ideal? The roller pressure is clearly the domain of high requirements. Books, newspapers, brochures and inserts are produced such as in the roller. The importance of these products is still attention and appreciation by the recipient/reader. Because also the hype surrounding the new media could not fundamentally change anything in recent years. Many creative & marketing specialists, use PRINT in the marketing mix remains very much on the medium.

EuropDruck.com, include many leading companies in the field of printing. And not only in Germany. Roller, excellent quality, produced also in other European countries for the German market. Through our website, it is easily possible in only 3 steps to obtain lucrative print deals for the printing. In the printing, highest quantities can be produced in a very short time. Be specific in the printing reached 30,000, 40,000 and up to 60,000 roller revolutions per hour.

To ensure a continuous production of the paper rolls “in the flying change” is changed. While the new roll of paper is brought on the speed at the end roll of paper. In the next step, both rolls of paper are glued together. It saves time and work and the machine needs so don’t be stopped. The roller pressure but offers even more than the pure pressure. So it is possible to connect “inline” additional folding and binding machines. It is in the roller in direct connection to the printing process, a fully integrated processing. Printing in best quality the roller stands today for a high quality, if all factors of production can best be coordinated. That was not always the case but the roller pressure has made in the last years huge steps forward and so include E.g. passport problems, a Bacon shine of the print image or a Wavy Edge finished product almost the past for webfed printing on. Great savings potential in the roller it is easily understandable that a printer comparison, especially in the printing, will provide very interesting results, it goes but almost always high and the highest requirements. An example makes this clear: two printers give off a pressure range for a circulation of 100,000 copies in the roller. The unit price, between A printer and printing B varies around only the difference in price is not less than 5,000 euros 5 cents per copy, but the total price! Whoever its pressure, with the same print quality, substantially would decrease is more than well advised with a simple, fast and free printer comparison. An effort by 10 minutes, for the entry of a print request “Roller” can save so easily some thousand euros you. A “princely” wage don’t you think?

News

Secure Resources

Posted on

Because only through the regular inspection of equipment can increase the occupational safety in the company and the employees protected against dangerous accidents. In the framework of the statutory tests for accident prevention and quality assurance, the HEIN industrial plates GmbH offers a wide range of inspection stickers, which are suitable for every purpose. With the Jahresprufplaketten 2012 HEIN range, no more test dates are missed. Every user at a glance clearly appears the next maintenance date and thus can not be forgotten. The standard plaques are available in 5 sizes from 8-30 mm diameter, arc or role. In particular cable plaques, which are also found in the range of HEIN industrial plates GmbH is suitable for cable and tools. Special offers for oily, dirty and oily surfaces Extra strong adhesive Jahresprufplaketten HEIN. For assistance, try visiting Lee Pitts.

This extra strong adhesive inspection stickers can be ordered on sheet in the sizes 20 and 30 mm in diameter. Jahresprufplaketten can be made tamper-resistant film once installed – no longer in one piece -. The material breaks when attempting to transfer into tiny pieces – thus no manipulation attempt goes undetected! The tamper-proof Jahresprufplaketten from the Grove range are suitable especially for tamper-proof marking. So-called transfer stickers are new in the portfolio of HEIN industrial plates GmbH. The transfer stickers are equipped with an ultra thin transfer film that adheres to almost any surface. The transfer stickers are available on ARC and in the sizes 20 and 30 mm in diameter.

At HEIN is the possibility to make individual inspection stickers are, also produced in material, shape, color and design according to customer wishes. An experienced team of graphic artists and Drucktechnikern develops customized for each Labelling requirements the optimal solution. Interested can see inspection stickers-request / open an inquiry, this fill with just a few mouse clicks and simply return email. The sales team of HEIN industrial plates GmbH immediately created a quote about individual inspection stickers.

News

Change Foundation Grant

Posted on

Change creation grant from 01.11.2011! When founding then now! Unfortunately, the too popular Foundation grant for entrepreneurs is changed to the detriment! Who still wants to establish he should do it if possible before the 01.11.2011. Following very adverse changes are made to the Foundation grant: 1 becomes the founding grant of discretionary power! So far, a legal claim on the founding grant there for ALGI receiver, also have a business plan and a sustainability certificate was required, but in the future, it is a discretionary decision regardless of and of work consultants can reject the creation of. This is certainly the most change! 2. reduction of the flow rate! The founding grant plus 300,-Euro social security package is only 6 instead of paid for 9 months. Cancer Research Institute gathered all the information. For the subsequent payment (to apply) extends the 300,-Euro social security package from 6 to 9 months. The duration of support generally remains the same, but you get 3 months less the founding grant. Until needed 3.Restanspruchsdauer on unemployment benefits to apply for Foundation grant a residual claim duration on unemployment benefits by at least 90 days, in the future, you have still a claim of minimum 150 days! The additional 9 months social insurance allowance are also a discretionary power and can be shortened. So it is advisable, if possible, to establish before the 01.11.2011! Also in terms of the 90 percent funded KfW Grundercoaching, as the basis for the promotion is the obtaining of Foundation grant. Who so the Foundation grant (from 01.11 discretionary power) no longer receives may unfortunately also not the 90% apply for sponsored KfW Grundercoaching. A very unfortunate arrangement is certainly a just for small entrepreneurs, and Kleinselbststandige!

News

ALG Founder

Posted on

How do you get the founding grant from ALG1 because many entrepreneurs don’t know exactly what is the exact procedure of the application on the founder grant of the employment agency, here there are the most important steps that are necessary. One advance, it is each ALG1 recipients to the founder grant. The employment agency can there any reverse during, if the required documents are presented can. The sequence: Up to 01.08.2006, there to which so-called I AG for the promotion of business start-ups. This funding initiative was replaced by the founder grant.

Everyone can apply for the founder grant, who would like to get out independently from ALG 1. Further details can be found at health organizations, an internet resource. All requirements that must be met: That the new companies is still not 65 years and still at least 90 days is entitled to ALG1. All those who want to become independent from ALG1, sure, in time to complete the application and submit to. The founder grant is legally entitled to all entrepreneurs and must be granted. This includes all but need necessary documents are submitted so that all legal requirements are met. The first and most important document is the business plan (called also business plan). The most important part is the profitability forecast to prove whether or not the business is profitable.

Now, the business plan must be checked by a competent authority. After successful testing, the entrepreneur gets handed out a certificate of capacity. With this certificate, the founder of proves the viability of his project. Now, the employment agency granted the founder grant of his last ALG1 cover. This grant is paid for 9 months now. From now on, the new founder pay for his social security and receives yet another payment of 300 euros to cover these in the founding phase. This payment can be granted for another 6 months if who can demonstrate founder, that its business is profitable.

News

Dental Gmb

Posted on

Walser Dental exhibition stand come. We thank you for your confidence in our Walser products, the laudatory words about our products and the many orders. We look forward to the 2015 to again welcome IDS. If you are unsure how to proceed, check out Center For Responsible Lending. More at: about Dr. WALSER Dental GmbH the Dr. Walser is dental since 1948 manufacturer of dental instruments, which are sold worldwide. Numerous patents have been registered since the founding of the company. “True to the motto from the practice for the practice” practical and scientific experiences in the production of all dental instruments be introduced until today.

With an export quota of 75%, the company delivers its products worldwide in over 80 countries. “” Awards: first medical technology company 2006 innovation success in the top 10 at top 2007 again in 100, top 100 companies, 2007 international best factory Award “in the top 3, 2007, 2008, 2009 and 2010 for the Oscar of the middle class”, nominated and get the industry Prize 2008. “2008 Top 100 product” in the United States. For social commitment in the years 2007, 2008, 2009 and 2010 by the Ministry of Economic Affairs Baden-Wurttemberg and the Caritas honored. 2009 the company won the business Goldjupiter”. 2010 in the top 10 of the most innovative solutions in medical technology for the industry Prize chosen. nominated for the industry Prize, 2011 2011 immortalized in the industry’s best 2011 medium-sized price LEA “socially engaged, title 2011” 2011 nominated for the great prize of the middle class “and finals reached. “2012 SME price LEA”Socially engaged 2012″, 2012 title nominated for the Oscar of the middle class”and finals reached, industry price 2012 title best of 2012”. Nominated for the Grand Prize of the middle class in 2013.