Sam Technology

Development of the newest coloring substances, obtain the most fine powder and fresh technology of electrostatic powder spraying said dye method as the most optimal for the production of products of mass consumption. Developed coloring matter of all colors and shades, made available to obtain the maximum of a thin layer coating. In addition, streamlined processes in the painting of parts designed specifically for this camera and showed overall superiority of powder coatings over previously known coatings. First: the application of powder coatings with different grain size and the use of qualitative innovations in technology the process of painting led to an opportunity to create a protective film not only with high technological parameters, but at the same time decorative. The surface now has the opportunity to purchase invoice, have glossy reflection or opposite dullness. As a result, we have what, the same process is at the same time two tasks: protection of the product and its external decoration. Second: computer, rather than manual control staining allows to receive the output of the film thickness from 40 to 500 microns, almost perfectly equal in thickness over the entire surface. Get more background information with materials from United Way Worldwide.

Third: powder coatings are known to be a complete non-toxicity, they absolutely do not flammable. To be safely stored only need to comply with minimum requirements for temperature and climatic regimes. Fourth: Powder paint the most environmentally safe to use in while staining completely observed emissions in the earth's atmosphere volatiles lead to the formation of ozone holes. Use of this technology in a sealed spray booth does not allow emissions the surrounding area of the powder. Fifth: limit the effectiveness of the technology and its phenomenal efficiency: the unused powder, which is not settled on the surface of the product may collect from the bottom of a sealed cameras for its subsequent operation. Sixthly: the demands of space for equipment for painting and installation of thermal cameras (smaller than conventional technologies staining for 1 / 3). Sam Technology process is now reduced labor costs by 40-50 percent. The Seventh: easy switching between views and shades of colors, a significant simplification of the preparation process and reduce time spent on it, the ability to connect additives and coloring agents in an already prepared powder. Reducing the basic rules of cost per unit area of coated product. Powder coating could easily be used for spraying protective coatings absolutely on any material: metal, silicate materials, wood, glass, plastic – led to this discovery of electrostatic spraying dye, the way "fluidized bed" and others, as well as the introduction of the original method of curing a layer – not the temperature, and using chemical treatments. Actually the latter opened the possibility of sprayed protective layer on a completely any kind of material.